a soap dish holder.
Dimensions ~ 6X12 cm (2.3X4.5 inch)
Toothbrush stand- coming soon!

This is a simple solution to avoid purchasing expensive automatic soap refills for the Lysol Automatic Soap Dispenser.

Ok My wife loves scented hand soaps from bath and body works.. She loves the candles too but that is a different story that i dont want to get into..

Anyways these hand soaps arent very cheap.. the pumps are extremely wasteful as you can see in one of my pics.. as a matter of fact i believe the manufacturers intentionally designed the pumps to waste a lot of soap in purpose..The more soap you waste the more you buy right?

My wife is pretty good about pumping just enough soap to wash her hands.. I however, i dont always pay attention and end up with a dollar or two of soap in my hands..

So When my little niece visited for a couple of days.. i found that these soap dispensers aren't kid friendly at ALL.. in 3 days she used up half the bottle.. So i went into my office.. .. designed a cool little fix for this hand soap problem.. 3d modeled a small prototype and 3d printed it.. and voila!! problem fixed

This nuPROTO hand soap attachement goes underneath the soap dispenser and around the tube.. this prevents the pump to go much further down that it needs to and decorates it with our 3d printed nuPROTO logo.. it gives you enough soap to wash your hand and if you need more.. you pump twice!!

This will save you a lot of green.. less soap and less waste is also green.. so now you can enjoy your nice scented soaps.. without worrying about your kids, visitors or yourself wasting money down the drain!!!

Ok i usually don't like to give out my inventions out for free.. i actually prefer that you buy my 3d prints at my online store shapeways.com/shops/amznfx

but this time i'm giving the file out for free in thingiverse
thingiverse.com/thing:55622

i just ask that you please vote for me instructables.com/id/nuPROTO-hand-Soap-Saver-attachements/

or promote this page and/or tell your friends about my prototyping company.
nuproto.com/

While not the most innovative design, this simple soap dish will get the job done. It is fairly light, so works great in the shower or other places where there is the risk of falling.

Fits a standard bar of soap.

A simple soap dish to allow your soap to dry without sticking to its surface.

This is actually dedicated to my girlfriend.

Little Machine that creates soap bubbles, driven by a battery, a motor and a little fan.
It features two different kinds of gear transmissions (total 162:1) which drive a rotor with blow-out holes. The rotor immerses first through a bath with soap on its lower half to build the soap-membrane in its holes. On the upper half of the rotor the fan should blow out the membrane to a bubble.

The aim is actually less functionality than being an DIY-eye-catcher: it was designed for acryl-cut and to be home build with very few different materials.

Bar Soap Holder with drainage.

CNC Soap Dish

Improved minimalist soap dish holder for curved soap (e.g. Dove bars). Slightly more smooth and with drainage holes out from the bottom.

A smallish soap dish. All smooth and minimalist-y.
Sized it off the "Dove" moisturiser-soap bars (which come in a 80x60x35mm box).

Newer version: thingiverse.com/thing:35671

A thing to hold your soap in the shower. Stops it getting soggy.

Soap dish with risers and sinusoidal drainage holes. Perfect for a shower or bath!

This is a fun way to demonstrate the surface tension of water.

A simple design for a soapbox.

I bike to work and use the showers at my office. The only covered soap container I had was one for a travel kit, and only fits the little dinky bars of soap you get from hotels.

This soap dish is designed to hold a full-size bar of soap.

Small soap dish I whipped up in a few minutes because my flatmate insisted on using toilet paper tubes to put his soap on.

Got an extra iPhone lying around? Got a sticky bar of soap by the sink? Solve both problems with the new iPhone Soap dish!

I added one with drain holes too!

Another entry for the EvD Absurd iPhone Accessory contest.

Original plain case was from Crístian Familiar Xaudaró on grabcad.com

Attain Nirvana in the most appropriate place, the bathroom, with this transcendent dish.

A very simple but effective soap tray. Tvål is swedish for Soap. :)

I've made this fancy soap holder. It has a nice flat base with lots of rounded edges. All in between are holes for the soapy water to flow out.

I first created a nice rounded soap holder body in openSCAD. Then, I wrote a simple python script to implement a circle packing algorithm into the shape of the soap holder. This program packed in the various size holes as closely as it could, and exported the data into a format that openSCAD could read. Feel free to play around with the script and make your own randomized designs.

The inspiration definitely goes to Art Lebedev: artlebedev.com/everything/saponius/

The instructions for this soap dish are embedded into the part itself.

A Tiny Soap Dish for those bitty hand soaps in the hotel bathroom, you open one up, get it wet, and there is no place to set it down except for the box or wrapper, which it then adheres to.

Things are different now. You just set your Tiny Soap dish on the counter, wash your hands, and place the tiny bar in its tiny home.

Soap dish designed by Pratt student A.Smith.

This is a soap dish inspired by topographical lines of the earth. It is the perfect little accessorie for next to your kitchen/bathroom sink.

A custom soap tray I made to fit onto the railing inside my sliding glass door

Most soap in the world is provided in the form of bars. Bars, that are deployed on grids or basins, that inevitably turn into a rather filthy, slimy affair.

This soap bar dispenser works differently. The soap bar is never in contact with water. Using the sled, you shave off flakes of soap from the bar.

(Note - the dispenser in my picture was aborted in mid-print, because I ran out of ABS and changing the spool did not work as expected. The model dispenser is higher, and the scad file is parametric anyway.)

This thing is public domain, because caring is sharing and I am counting on the thingiverse hivemind to make this more awesome. Feel free to flattr me or any derivatives if this is useful for you.

This is another soap dish is designed to use 3M Brand or similar "Command Strips" or double-tape to mount it anywhere inside your tub or shower ... like to the side and under the shower head ... or along the shower wall anywhere up high so the water isn't continually rinsing over your soap ... this is especially great for roommates to have their own soap dish in the shower or by the sink minimizing clutter and space yet providing a more hygienic solution.

This is another of many entries to the makezine.com/go/makerbot contest ...

blog.makezine.com/archive/2010/04/makerbot_giveaway.html

This soap dish is designed to use 3M Brand or similar "Command Strips" or double-tape to mount it anywhere inside your tub or shower ... like to the side and under the shower head ... or along the shower wall anywhere up high so the water isn't continually rinsing over your soap ... this is especially great for roommates to have their own soap dish in the shower or by the sink minimizing clutter and space yet providing a more hygienic solution.

This is another of many entries to the makezine.com/go/makerbot contest ...

blog.makezine.com/archive/2010/04/makerbot_giveaway.html