Customized version of thingiverse.com/thing:41002

Created with Customizer! thingiverse.com/apps/customizer/run?thing_id=41002

There are plenty of other cups and vases on Thingiverse. This OpenSCAD file was uploaded primarily to check out the Customizer feature.

It makes a simple cup or vase with either a circular cross-section or a regular polygon cross-section.

This is a simple thing that slips over the end of the upper lever arm of a nail clipper, to give you a better grip. At least for me, it keeps my thumb from sliding down the lever arm, so it is easier to clip my finger nails. I was surprised at how much difference it made..


The OpenSCAD file is entirely parametric, but I think most nail clippers can be accommodated by changing just two input parameters, as explained in the OpenSCAD file.

The sketch (pdf file) shows at least most of the parameters and variables, and a very rough sketch of the thing. It's a scan of the un-cleaned-up sketch I used during the final design stage.

Print various shapes of yo-yos using the OpenSCAD script. Both "Imperial" and "Butterfly" shaped yo-yos may be made.

The shape of the yo-yo halves are based on an ellipsoid, formed by scaling a unit radius sphere, using different scale factors for the z-axis vs the x-axis and y-axis.

Faces are formed in the ellipsoid by differencing cubes, offset from the xy plane, from the ellipsoid.

A hole for the yo-yo axle is formed by differencing a cylinder from the modified ellipsoid.

All the parts and assemblies are translated so they all sit on the XY plane, and centered on x=0, y=0, except the x-sections.

There are also options for cutting a pattern into the outside faces, making large cutouts into the outside faces and cutting voids into the interior of the yo-yo halves. Both the cutouts and voids are meant to be used to vary the moment of inertia of the yo-yo.

Axles can be either printed or cut from wood dowels, metal rods, or plastic rods.

Yo-yos can also be rendered with both halves and the axle assembled. So there is the possibility of printing a complete yo-yo, other than the string, If you want to print a complete yo-yo, you need to set the parameters used to adjust the hole diameter and the axle length such that they do not cause the parts to be unconnected. The stl files of merged parts that I've uploaded have been made using parameter values which cause the merged parts to be connected into one solid 3D part. The merged x-sections show the unconnected parts that were modeled using the parameters used for printing separate parts, so there are small gaps between the axle and axle holes.

The yo-yos in the photos were printed on the MakerBot Replicator at TechShop Austin - Round Rock (Texas). Using black ABS plastic, 80 percent fill, and 3 shells.

This is a work in progress. Some of the things I want to add are: use of ball bearing axles, use of cylinders as the base shape, axles with a narrower diameter at their center than at their ends (to keep the string away from the sides), printing patterns on the inside faces of the halves to modify the friction of the inside faces. I also want to experiment with post-processing the parts to make them smoother. I also want to write a simplified OpenSCAD script where all the parameters are input as actual values rather than as ratios and factors, and with slightly fewer choices.

The file Star01.stl is a "centered and set on the XY plane" version of the star in thingiverse.com/thing:35495 .

Please play around with the different parameters and post photos of your yo-yos or yo-yo parts.