Use this holder to attach your mechanical endstop to the side of the extrusion holding the Y-rail.
Compatible with the kit sold by Maker's Tool Works and Trinitylabs.
This design ensures no travel is lost.

I scaled the single-plate Prusa i3 down to make a printer that works with a 100x100x100mm volume and has limited footprint.

The mini-i3 extents are ~250x280x270mm. Frame is designed to be cut from 6mm aluminium.

Suitable heatbeds will be available soon!

Download STL and DXF files at github.com/josefprusa/Prusa3/tree/master/mini

The mini was developed at the Unterwelt lab in Rome, Italy.

I was not satisfied with the Igus bushings on the Shapercube carriage because they were too close and the carriage is a bit too heavy, causing backlash.
I designed this adapter for the LME8LUU long linear bearings that removes any backlash and makes the movement very very smooth.

Use this mount to attach a 120mm fan to your MendelMax or other machines.

Suppose you have a frame with predrilled RAMPS mounting holes. Suppose also that you have a spare Sanguinololu board you'd like to use. Suppose you didn't realize that mounting holes are not compatible.

I fixed the Tornado model by turning it into a two-manifold solid shape. This makes it compatible with Slic3r too.

The excellent sjkelly's carriage has mounting holes for two 40mm fans pointed towards the nozzle with a 45° angle. I actually needed to point fans towards the Budaschnozzle heat sink because of problems when dual-printing with PLA. So I designed this L-bracket.

More information about my setup (kindly sponsored by LulzBot!) is available at devel.lulzbot.com/AO-100/hardware/dual/dual_color/

I modified zignig's script to make it compatible with latest Blender version (2.59) and to support modern 5D GCODE (that is, the one for stepper extruders with the E parameter and no tool-off commands).

Development at github.com/alexrj/blender-gcode-reader

(The object in pictures was sliced with Slic3r, slic3r.org)

Update (2012-05-04): patched by ceterumnet.