Thingiverse - laszlo's Things

Thingiverse - laszlo's Things http://www.thingiverse.com/laszlo Fri, 10 Feb 2012 13:03:03 +0100 FeedCreator 1.7.2-ppt (info@mypapit.net) en-us Copyright 2012, Thingiverse.com Arcol.hu_hot-end_v3.0 http://www.thingiverse.com/thing:4632

arcol.hu_hot-end_v3.0_real

This is a dummy model of the Arcol.hu hot-end v3.0, because a hot-end can't be printed using plastic:)

You can print it to get a general feeling of the actual size. Also the mounting should be correct, so if you are working on your own machine, or new drive mechanism, you can adapt it easily by printing out this model.

The M3 bolt heads are commented out in the .scad file, to be printable.

I also added real photos for comparison.

You can read more about the hot-end itself at:
blog.arcol.hu/?p=1746
wiki.arcol.hu/arcol-hu-hot-end

]]> laszlo Sat, 30 Oct 2010 12:11:26 +0100 http://www.thingiverse.com/thing:4632 Blender gear http://www.thingiverse.com/thing:4471

gear_step2_k

My blender broke, here is a replacement gear.
For full details please see this article:
blog.arcol.hu/?p=1699

I dont know how many blender has these design, maybe the cheaper ones...

]]> laszlo Sun, 17 Oct 2010 14:52:28 +0100 http://www.thingiverse.com/thing:4471 z_switch holder for heated bed http://www.thingiverse.com/thing:3134

z_switch_holder

This thing hold the limit switch on the Rapman bed. It has an adaptor to have a wide tolerance. It is especially usefull if you are replacing your bed with your own design, like a heated bed.

For full details please see this blogpost:
blog.arcol.hu/?p=1054

]]> laszlo Sat, 15 May 2010 20:39:03 +0100 http://www.thingiverse.com/thing:3134 Counter nut holder on the extruder http://www.thingiverse.com/thing:3136

extruder_nut_holder_side

This thing is really simple, but really great tweaks for your Rapman extruder. It replace the stock acrilic piece, where you needed to push the nut hot into the plastic. It never really works.

For full details (and more pictures), please refer to this blog entry:
blog.arcol.hu/?p=1054

]]> laszlo Sat, 15 May 2010 20:38:50 +0100 http://www.thingiverse.com/thing:3136 Extruder stanchion http://www.thingiverse.com/thing:3138

square

This is a simple cube, which makes the Rapman extruder a bit more rigid.

For full details (and more pictures), please refer to this blog entry:
blog.arcol.hu/?p=1054

]]> laszlo Sat, 15 May 2010 20:38:41 +0100 http://www.thingiverse.com/thing:3138 Big foot http://www.thingiverse.com/thing:3135

big_foot

This is a limit switch pusher for Rapman.
It helps if you have some errors here and there, and the bolt head does not touch exactly the switches.

For full details (and more pictures), please refer to this blog entry:
blog.arcol.hu/?p=1054

]]> laszlo Sat, 15 May 2010 20:38:20 +0100 http://www.thingiverse.com/thing:3135 Drive pulley http://www.thingiverse.com/thing:2032

day8_drive_pulley_compared_k

I modified the official Mendel drive pulley to fit my filed motor shaft.
I created back in january, I put it here because I was asked so;-)

For full details please refer to this article:
blog.arcol.hu/?p=312

]]> laszlo Sat, 20 Mar 2010 21:11:19 +0100 http://www.thingiverse.com/thing:2032 Dremel holder http://www.thingiverse.com/thing:1767

dremel_setup_k

Actually it is a multipurpose holder. It made primary for a Dremel to mill my bed flat. But even a pen can be attached ot it.

More details at my blog: blog.arcol.hu/?p=629

]]> laszlo Sun, 07 Feb 2010 16:47:34 +0100 http://www.thingiverse.com/thing:1767