This are the parts needed to make a wider carriage for the Huxley 3D printer, so you can mount a Arcol.hu Hot-end between the x-bars.

You can read more about this at ifeelbeta.de/index.php/production/huxley-wide-carriage-fuer-arcolhu-hot-end

This only includes the changed files.

This is a replacement blade holder for Gillette MACH 3 razor blades which i mistakenly bought.
This doesnt use the fancy connection mechanism as the original, it just has a tight fit to the blades. But it works :-)

You can read more about it at: ifeelbeta.de

This is a multicolored case for the OpenWorkbench LogigSniffer board.

It was printed on my Rapman with colored PLA. The color changes where done with exchanging the filament midprint, which works fine if you are able to pause your print.

You can read more about this on ifeelbeta.de

This is a glowing alien head.

It is printed in two halfes with glow-in-the-dark PLA (from http:/www.2printbeta.de) and enhanced with two red LEDs for extra special effects. It was printed on my Rapman and is about 8x8x12cm big.

You can read more about it at: ifeelbeta.de

The model is from the google sketchup gallery ( sketchup.google.com/3dwarehouse/details?mid=f3b51b4e5e048f286e49888b290e362f&prevstart=144 )

This is a multipart house. The model is from the sketchup gallery and was heavily modified to make it printable.

The house was printed in white PLA with a layer height of 0.25mm on my Rapman 3.1

You can read more about that at ifeelbeta.de

This is a Porsche Carrera GT. The Model is from Sketchup Gallery but was heavily modified to get it printable. You can find more about this at ifeelbeta.de

It was printed in blue PLA with a layer height of 0.25.
After printing, the model was sanded and painted to get a nice look.

This is a fully moveable model of a KUKA KR180 industrial robot.
Its about 5x5cm at the base and about 20cm high if the arm is full upright.

You can find more about it at ifeelbeta.de

A white cube, which only shows the logo if the RGB LED is switched on.
You can find more details about it on ifeelbeta.de

The logo is from our new reprap related shop 2printbeta.de

This is a screwless big spool intended for PLA spools with very big inner diameter. All connections are secured with a piece of filament.

You can find more info about it here:
ifeelbeta.de/index.php/production/screwless-megaspool

Warning, this thing is big !

This the same model as thingiverse.com/thing:3015 but its mirrored.
You need this for the 2 head mendel x-carriage.

All other parts are unmodified, take them from the original Wades extruder.

You can find more info about it here: ifeelbeta.de/index.php/mendel-x-carriage-for-two-extruders

This is a modification of thingiverse.com/thing:3017 and
thingiverse.com/thing:3016 to fit two Wades exrtuders with Bfb Hot-ends.

This will cost you about ~5cm X buildspace on a Mendel.

You can find more info about this thing here:
ifeelbeta.de/index.php/mendel-x-carriage-for-two-extruders

This is a modification of the parametric carriage lower for Mendel. It have been modified to fit a BfB Hot-end.

This Part will mate with: thingiverse.com/thing:3016
For a fitting extruder look at: thingiverse.com/thing:3015

You can find more info on this on:
ifeelbeta.de/index.php/production/wades-extruder-with-bfb-hot-end

EDIT: the model was missing some cut-outs, which i just fixed.

This is a modification of the parametric carriage upper for mendel. It was modified so a BfB Hot-end will fit into it.

This part will mate with: thingiverse.com/thing:3017
For a fitting extruder look at: thingiverse.com/thing:3015

You can also find more info on this on:
ifeelbeta.de/index.php/production/wades-extruder-with-bfb-hot-end

This is a modification of Wades extruder to fit a hot-end from BfB.
I made holes to mount the hot-end, and removed all not-needed holes.
I also moved the mounting holes so the filament holes is exactly in the middle of it.

All other parts are unmodified, and should be taken from the original.

You will also need a modified carriage if you want to use this on mendel.
You can find that under thingiverse.com/thing:3017 and thingiverse.com/thing:3016

You can find more info on this on:
ifeelbeta.de/index.php/production/wades-extruder-with-bfb-hot-end

Need something to set your object into the correct light ?
Print yourself a small Spotlight..

This Par64 Spotlight is ~8cm high and 4cm wide.

You can see more pictures at: ifeelbeta.de/index.php/other-objects/par64-spotlight

This is a variation of the normal displaystand.
It uses a bench as top.

The Beco creatures are not included in this product

You need something to present you printed parts ?
Print this display stand to present you parts mounted to a wall.

You can easily modify the openscad file to make new tops, if you part you want to present has a different size.

(Android not included in this product. Its thingiverse.com/thing:1941)

This is a Rocket i made in openscad.
Added little led on the bottom for effect.

It is a little big, so it tooke me 5,5hours to print with nearly no infill.

This is a modification of the Lovable Google Android.
I uses openscad to modify the model, make it empty and create space for the elektronics in it.

The stl files with the 2 at the end, are the new models. The other stls are inputs for the openscad scripts.

If you turn the Head of this Android, it will change the color of its Body. As i didnt have a potentiometer, i used a photocell for it.

This is a parametric lego duplo built in openscad.
I exported and printed a 2x2x1 duplo, but other sizes should work too.

The sizes for the duplo stone could need some more tweaking to make the fit perfect, but current version still sits pretty good.

Modular Boxes.

Print boxes and drawers and combine them as you want.

This is a dock i made for the Sansa e200 series Mp3player.
Cables/connector fit a bit tight, but it works fine.

Made with openscad. Sourcefiles attached.