A stand for AeroPress™ style coffee makers. The stand provides stability when applying pressure to the plunger as the coffee maker no longer rests directly on a narrow and possibly unbalanced cup.

AeroPress™:
aerobie.com/products/aeropress.htm
aeropresscoffee.co.uk/

Made at the London Hackspace:
london.hackspace.org.uk/

A small PCB that breaks out SSOP-08 packages to a standard 0.1" pin spacing. This allows you to use these SMD devices with bread boards and strip boards. I created this board so that I could use a PCA9306 I2C level shifter in a prototype, but it'll work with any SSOP-08 device.

An enclosure for the Arduino and Ethernet shield that can be laser cut from sheet acrylic. Provides access to the USB port, DC jack, Ethernet port, SD card slot, reset button, and pin headers.

The enclosure is based on the standard Arduino enclosure:
thingiverse.com/thing:5029

It has been resized and has additional port cut-outs. Furthermore, the hole for the rest button has been moved to align with the button on the Ethernet shield.

The case was designed using measurements from an Arduino Uno board and a Arduino Ethernet shield v5.

Made at the London Hack Space:
london.hackspace.org.uk/

An enclosure for the Arduino that can be laser cut from sheet acrylic. Provides access to the USB port, DC jack, reset button, and pin headers.

The case was designed using measurements from an Arduino Uno board.

See also: 'Arduino and Ethernet shield enclosure':
thingiverse.com/thing:5044

Made at the London Hack Space:
london.hackspace.org.uk/

I wanted to make some unusual, personalised Christmas tree baubles. This laser cut design slots together without any additional fixings. There is enough room inside for some flashing LEDs or perhaps a small gift!

Made at the London Hack Space: london.hackspace.org.uk/