This will be re-uploaded to another site once a suitible site is found. I do not believe that I, or the original author (in the case of my derived works) appreciates giving up all rights to own our own designs. Once A suitible location is found, or a temporary one is located, A note will be posted here. Have fun!
randmsystems.com/stuff/public.php?service=files&t=97ab3dd20a903c17c8625ef382e78404

This is my modified template for printing masonry style bloxen for Seej. This does more then print 6 at once, and less. These models are slightly different then the stock-bloxen and are made to correct what I saw as minor problems with the model.

Fixes:
The merlons have been narrowed slightly, this prevents the bloxen from snapping together vertically, which made a fairly difficult to break barrier.
The holes have been moved slightly as well, allowing the bloxen to stack at 90 degree angles without a overly tight fit.
Some of the bloxen had their merlons removed to allow a flat-top and more asthetic appearence (Also some of us like to put the flags up there! Bonus points for hitting a flag without hitting the bloxen...)

Regretably, I have no pictures at this time. But it does turn out pretty cool =)

This will be re-uploaded to another site once a suitible site is found. I do not believe that I, or the original author (in the case of my derived works) appreciates giving up all rights to own our own designs. Once A suitible location is found, or a temporary one is located, A note will be posted here. Have fun!

This is a simple adapter for the Losi Mini-8ight for a GoPro camera.

Can see it in action here:

youtu.be/Ehv7GBcJ-Ws

It does move the weight up and to the back, making wheelies and rolls a bit easier, but this car is pretty prone to those to begin with, so it's not so bad.

Enjoy! ;)

This will be re-uploaded to another site once a suitible site is found. I do not believe that I, or the original author (in the case of my derived works) appreciates giving up all rights to own our own designs. Once A suitible location is found, or a temporary one is located, A note will be posted here. Have fun!

Coaster:
randmsystems.com/stuff/public.php?service=files&t=e333aff5de32c78c28c97c931fb89477
Mini:
randmsystems.com/stuff/public.php?service=files&t=528a954c17b50499fa7ad18e21fce592

This is a simple drink coaster I made. The primary purpose of this coaster is to collect condensation that builds up and drips down.
Quite a bit can be held before it fills up!
It's undergone a few revisions, and seems to be pretty good.

This newest revision has taller walls and deeper channels.

Update: There's now a more can-sized version available. Some parts don't scale down well, so this is a remodel and not just a scale!

I didn't like the rotational clamps JoeyC designed, so I made a change in my own modification.

These are slide-clamps that replace the top-clamps of the original. Instead of drilling the acryllic, these can be just glued. (The front-panel still should be drilled, however, see instructions)

This will be re-uploaded to another site once a suitible site is found. I do not believe that I, or the original author (in the case of my derived works) appreciates giving up all rights to own our own designs. Once A suitible location is found, or a temporary one is located, A note will be posted here. Have fun!

These are accessories and add-ons to the Seej Catapult. In the combined file, half are from other people, sources attributed.

The accessories are as follows:
Standing Legs Attachment - As anyone who's printed the catapult notices, the arm hits the ground and may throw aim off a bit. These are just printed out and snapped on the bottom to give it a little bit more height. They can be removed (front or back) to adjust aim a little.

Standard Arm: I like to print this as part of the kit, along with another thing which will be posted later. It just feels incomplete without this.

Cup-arm: Wauter made this rather nice cup, and I like it as part of the accessory kit I use.

Horizontal-Arm: While play-testing Seej, a few of players insisted on trying to use the standard arm to launch a penny sideways, for more surface area. This was created as an answer to that. Two pennies can be fitted into it's shaped-bucket.

Delux Tripple-Arm: Mattbstrong made this one as part of a delux catapult. While the arm is a bit tight for pennies (Does a good job with dimes), it's too cool to exclude.

This is a Bloxen for Seej that attempts to take advantage of the Replicators dual extrusion capability. The model isn't quite right yet, so expect a V2 to be posted at some point!

This is my first thing, a replacement hinge for the Igloo 120 Quart Polar Cooler. A nice cooler, but the hinges came apart somewhat quickly.