Acessory to arrange flowers

v2.0: renamed from schikrooster

I used Blender to make the Ice Bear fuzzy.

I made several resolutions The print I made has 100k polygons.

I've remixed the customizable wrench in the following ways:

- Made cylinder size on closed tool smaller than on the open one.
- Automatic thickness
- customizable printer margin
- Added possibility to only have one tool
- Dual extrusion
- Rounded edges

Customized version of thingiverse.com/thing:47842

Created with Customizer! thingiverse.com/apps/customizer/run?thing_id=47842

Trumpet Tin Mute

Trumpet Straight Mute

This module makes a shape follow another shape to make more complex stuff.

I needed a Victorian vent for my bathroom.

Rosette for pipes for waterworks.
All the rosettes that I can get in the stores are ugly. So I needed a custom one.

Useless fact:
I used a cylinder with variable number of sides for the hole. I needed this to fit to a hexagonal nut. But OpenScad uses the center-to-tip size for diameter. Usually hex (and square) sizes are side-to-side. So I had to divide the radius by cos(180/NumberOfSidesForHole). Therefore this works for square, hexagonal, 8-sides 12 sided and round holes. I'm proud of myself, but noone will ever notice the true beauty of it.

Customized version of thingiverse.com/thing:55520

Created with Customizer! thingiverse.com/apps/customizer/run?thing_id=55520

Copy-paste this code if you want to have rounded blocks and cylinders in your models.

I needed a dimmer knob and plate...

It seems to be a European (UP) standard size. (I had this dimmer elektroversand-schmidt.de/images/jung_dimmer_266gde.jpg)
Oh, yeah: customizable, just in case.

Edit v1.2 with roundings using my new rounded primitives code.
thingiverse.com/thing:58478
Also has a rack now.

Thing in Progress

Customized version of thingiverse.com/thing:55520

Created with Customizer! thingiverse.com/apps/customizer/run?thing_id=55520

- Customizable to any brass mouthpiece.
- Plays well.
- Tested to be hilarious.

Inspiration Trumpstache from Polymaker (http://www.thingiverse.com/thing:8031)

Is used the blender to openscad export from Graphicsforge
(http://www.thingiverse.com/thing:47531) to export a low poly version of the Movember from Nicolas Clewis (http://www.thingiverse.com/thing:4648) and added that to my parametric moutpiece (http://www.thingiverse.com/thing:44422).

I came up with this simple roller bearing when I saw the gear bearing:
thingiverse.com/thing:53451

There is a major design flaw: the rolls tend to turn. However it seems to run much smoother than the gear bearing.

Customized version of thingiverse.com/thing:44422

Created with Customizer! thingiverse.com/apps/customizer/run?thing_id=44422

Customizable Candle adapter, but can be used to fit something into a bigger hole.

Versatile customizable wall mount for basically any flat object.

I used it to mount a tablet on the wall of a friend's house.

This submarine just got some room for payload!

Customizable calipers. Always come in handy. I had never enough of these.

Customizable (Parametric) printable fastener (Velcro).

Version 1.0: Printed and tested in ABS and PLA.

Fool your friends with this fake house fly.

Or you can prevent people from eating your stroopwaffle.

Faster and more versatile than my previous Greeble.

But only creates a square greeble. Good for cities or a plane.

If you want a cube, build 6 of them and put them together.

Version 0.3: Color differences

This is my first Customizable Greeble.

A Greeble is for example a Borg cube, a boring primitive with lots of detail.
You can also use it to make a city.

After my Parametric Customizable Brass-intrument Mouthpiece, I'm looking if I can actually print a Trumpet. This is the first step: Make a pipe of the right shape. Feel free to play around if you get how it works.

I finally printed a mouthpiece that sounds the same as my Bach 5.


New in Version 2.1: Works with Makerbot Customizer
New in Version 2.0: OpenSCAD Parametric (make a mouthpiece for any brass instrument)

This is an predecessor to Mouthpiece 2.1:
thingiverse.com/thing:44422

After I successfully printed the working Trumpet mouthpiece yesterday, I learned OpenScad and made a parametrized version.