This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org

Motor mount is used to attach NEMA23 stepper motor to Contraptor assemblies.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+motor-mount

This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org

A pair of shaft mounts with bearings support a threaded rod used as a pulley shaft or a lead screw.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+shaft-mount

This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org

Linear bearings ride on linear rail thingiverse.com/thing:1071, driven by belts or leadscrews. A pair of rails and at least a pair of linear bearings are needed to make a complete linear stage. There are three sizes of the linear bearing: 3.5", 2.5" and 1". The part list is for 3.5" size.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-bearing

This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org

Linear rail comes in several lengths: 6", 12", 18", 24" etc. Attached DXF file and part list are for 12" long linear rail.

The rail can be attached to perforated angle, channel or T-slot profile, such as 80/20 Fractional 10 series. A pair of rails and at least a pair of linear bearings thingiverse.com/thing:1075 are needed to make a complete linear stage.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-rail

This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org

Sliding elements slide on perforated angle thingiverse.com/thing:1066, driven by either leadscrew or belt. There are three sizes of the sliding element: 3.5", 2.5" and 1". The part list is for 3.5" size.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+sliding-element

INTRO
It seems to be the month of construction sets on Thingiverse, so here is another entry in the category.

Contraptor is a DIY open source construction set for building Cartesian robots. It is basically 1" aluminum Erector set with linear motion extensions. While it's in development and sometimes things don't work as they should, functional robots have been assembled from it: contraptor.org/contraptions

The set is designed to be made with the simple tools of a basic workshop. A lot of materials for Contraptor like aluminum angle, threaded rods and fasteners can be found in a hardware store. In the spirit of modularity, it uses Makerbot/Reprap electronics and Arduino/Sanguino controller.

In addition to DIY plans, we're working on Shopbot-able kits that can be manufactured in small quantities by anyone willing, from open source drawings.

Contraptor components and assemblies are modeled in Sketchup and are hosted on Google 3D Warehouse, mostly for ease of accessing from within Sketchup. Thingiverse is the best place to host DXF/SVG sources and part lists for components, so there will be more Contraptor things coming (hopefully including printed ones from the community :).

Apologies for the long read, on to the thing:
/INTRO

Perforated angle comes in lengths from 1" to 24" and can be used as a structural component, as well as a linear motion rail for sliding elements. Attached DXF file and part list are for 1-ft long perforated angle.

Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+angle