Same object as before, just split in half to be printable on a cupcake.

Storage clip for LED Flashlight. My local hardware store has these cheap LED flashlights by the cash register. I have a bunch and needed a place to store them. The center shaft is 25mm in diameter, so this could be used for other items of similar diameter.

While fixing something at home I needed to hold the flashlight while working. I immediately thought about changing the clip to hold it on my hat. The grippy teeth are inspired by thingiverse.com/thing:13612 .

UPDATE: Added design files in multiple formats.

Model of the earth divided along the equator.

I just used netfabb to split the original model in half for easier printing.

Another revision of my knee joint for a bunraku style puppet. This uses less plastic and has a better range of motion.

It is meant for a 2'-0" to 4'-0" armature. They are also included in my updated thingiverse.com/thing:13477 Legs for a Bunraku Puppet Thing.

A light up hand held mirror.


A local production of Beauty & the Beast Jr needed a magic mirror prop for the show.

Files to create legs for a Bunraku style puppet. These will soon be part of a complete bunraku type puppet that I will post.

UPDATE:11/21/11 Changed the knee joint to use less plastic and have better range of motion.

These are the pieces to create an arm for a BunRaku style puppet. There are additional parts besides the printed pieces necessary.

INcreased in size and broken into two parts that can fit the build platform of the MBI Cupcake.

The title says it all. It is a small chair to scale.

A revision of my previous joint for a Bunraku Style puppet. This version has less printed parts and less hardware.

Sometimes your co-worker says"I'll do that when I get around to it." That's when you need this. It is a round token with the word "Tuit" on it. The next time someone says that to you just hand them this and say "Here is a Round Tuit for you then."

Or perhaps a better name is a Prop broomstick for action figures.

My kids were making their action figures fly on broomsticks (currently reading Harry Potter aloud to them) by using straws. So I thought I would make them better broomsticks to play with.

A Foldable business card stand. Made with the Makerbot Industries "M"

A printable clown nose for one and all!


As soon as I have time I will print it out and test it.

A Small toy Elephant with it's trunk pointing up. It is good luck.

Revised the model to improve proportions. And added a minor support for the ears like my previous elephant.

A small model sofa in 1/4"=1'-0" scale. I made this to demo the Makerbot at a Tech Theater conference.

Cuboid with proportions of 1:4:9

Little Giraffe to play with.

It is totally printable, I apologize for uploading something w/o previously printing it. I will soon.

Ribbit. Ribbit.

My daughter wanted a frog. Here it is for anyone else. I have included the file in other 3d formats for people to play with.

Another surprise box for people w/ 3d printers.

I have included a 3D dxf file for others to play with.
UPDATE: INcluded an .igs file as well. Leave a comment if you want another file format and I will see what I can do.

A basic rod style puppet to renact your favorite makerbot adventures.

You have the choice of any head listed below.

I will update with completed picture soon.

There is room for improvement, what ideas do other people have?

My kids need help with chopsticks. This can hold them together so they can focus on eating.

Here is a small toy elephant modeled in VectorWorks. I have included other versions of the file for people to play with.

WHile in transit, the airline banged around my Makerbot to much and broke the 1/8" plywood piece of the X-Stage front. So I downloaded the DXF from thingiverse and made a printable version.

I needed a place to hang up the hand tools next to my desk. Vectorworks and Makerbot to the Rescue!

Model for a small x-wing fighter from Star Wars. Currently does not have the laser things at the end of the wings.

It uses some of the 3mm filament as a connecting 'dowel' for the two pieces.

Modeled in Vector works.

As soon as I have tie this weekend I will print this and post a picture. Also I will make the laser things for the wingtips. After that I will post the source files.

I saw a little Matchbox car sized ship and thought i could do that. Made in Vectorworks, I exported an stl and a DXF ( that contains the 3d info).

My first print didn't have any fins(as you can see in the image). i added that to the final file.

Update: added other file formats for anyone interested in adapting it.

Here is a knee joint for a Bunraku style puppet. From the moment I first saw the makerbot, I wanted to make parts for puppets. Old version of joint: flickr.com/photos/ccstudio/299456450/in/set-72157594380051493/

Soon I will be working on the elbow joint and other parts.

UPDATE: I have revised the design. New STL's uploaded. Also uploaded other file formats for those intersted in adapting it.

Here is a Toy paddleboat for your kids to play with. Created using the Drafting/Modeling program Vectorworks which can output .stl files. I have not had the chance to confirm the .stl files are in the right format. There were some options in the export window and I don't know if I chose the right ones.