Thingiverse - johnnyr's Things http://www.thingiverse.com/johnnyr Fri, 10 Feb 2012 08:15:39 +0100 FeedCreator 1.7.2-ppt (info@mypapit.net) en-us Copyright 2012, Thingiverse.com Wade's G17 w/ mount for Adrian's Geared extruder hot end http://www.thingiverse.com/thing:3569
Mashed Wades Geared Nema 17 with Adrian's hot end so I could check out Adrian's new hot end ( reprap.org/wiki/Geared_extruder_nozzle ) and another hot end by Tim. It is 14mm wider to allow 2 4mm bolts to attach to trapped 4mm nuts. This is only the extruder block the rest needs to be download from Wade's original extruder or other derivatives there of.

Warning - after some testing the bolts got too hot and pulled through the extruder block / redesign on the way.
]]> johnnyr Tue, 20 Jul 2010 05:39:03 +0100 http://www.thingiverse.com/thing:3569 Mendel Pen Spring Mount http://www.thingiverse.com/thing:3526
Pen mount with a spring to prevent smashing the tip of a felt tip pen. Quite useful for pen based circuit board etch resist ;)
]]> johnnyr Tue, 13 Jul 2010 15:53:42 +0100 http://www.thingiverse.com/thing:3526 Pinchwheel Worm by Drill Jig http://www.thingiverse.com/thing:1802
Jig for cutting worm type pinch wheel on M8 bolt for Wade's geared nema 17 extruder thingiverse.com/thing:1794 with a drill, but without using a vise.
]]> johnnyr Fri, 12 Feb 2010 01:54:01 +0100 http://www.thingiverse.com/thing:1802 Mirror Clip http://www.thingiverse.com/thing:977
The little plastic clips that you run a screw through to hold a mirror on the wall.
]]> johnnyr Mon, 07 Sep 2009 02:09:05 +0100 http://www.thingiverse.com/thing:977