Accessible Wade extruder pusher by laszlo

This is the extruder pusher which goes on top of an x-carriage. It was adjusted for Arcol.hu hotend v4, link: http://blog.arcol.hu/?p=1979 And goes on top of the x-…

Published: 5 months ago on Jan 2, 2013
License: Creative Commons - GNU GPL

Beefy Wade Extruder Gears by elk

My Wade extruders are now under fire since over one year and still doing great. The most used one now has some noticeable slackness and I need to soon replace the …

Published: 1 year ago on Apr 4, 2012
License: Attribution - Creative Commons

Inverted Tom's guided Greg's accessible hinged Wade's geared extruder by sicarius

This is a Mendel90 compatible Tom's guided hinged wade's. The wade provided with the Mendel90 is rather old, so i wanted the same extruder as i have on my Prusa, …

Published: 1 year ago on Apr 15, 2012
License: Attribution - Share Alike - Creative Commons

Double Wade-type Extruder by vik

This is two Wade extruders joined together. The mounting holes from the second extruder have been moved, and they're just a few mm off being joined by the centre …

Published: 2 years ago on Mar 11, 2011
License: Creative Commons - GNU GPL

Grease Bin for Wade Extruder by M_Sanna

This thing avoids dripping grease on the heatbed when you have greased the gear.

Published: 10 days ago on Jun 9, 2013
License: Attribution - Creative Commons

Greg's Wade extruder for Prusa i3 by misan

Just use a regular nema17 motor and Bob's your uncle. Two things have been changed from regular Greg's, one is the motor location, that has been translated, and the…

Published: 3 months ago on Mar 25, 2013
License: Attribution - Creative Commons

Simple sliced Wade's Geared Extruder by droftarts

Yet another extruder design, but this one is designed to be built with simple tools for tightfisted repstrappers like me, who want to build it themselves, not just …

Published: 2 years ago on Apr 26, 2011
License: Attribution - Share Alike - Creative Commons

Revised Wade's extruder by CdnReprap

********* files removed due to new legal terms***************8 Here is my revised version of Wade's extruder block. -Revised the inset area for the 608 bearings -…

Published: 2 years ago on Jan 11, 2011
License: Creative Commons - GNU GPL

Accessible Wade's Extruder 9/47 by Stoffel15

I have changed the gears to 9:47 for better torque. The top is now closed. It is now easier to open the Idler. The heater barrel hole is now 10mm. The Gears dont …

Published: 2 years ago on Aug 31, 2011
License: Creative Commons - GNU GPL

Transport screw workaround for wade extruder by maakit

I don't have a drill-column at my disposal so designed this Dremel attachment to center the 8mm bolt while hobbing. Pictures say more than words....

Published: 2 years ago on Sep 7, 2011
License: Attribution - Share Alike - Creative Commons