Simple 3D Puzzle
by asp55, published
0
Share
2102
357
Report Thing as Inappropriate
Description
I had a little extra space on some 1/8th inch plywood I cutting for another project, and decided to cut a copy of Travis77's puzzle [ thingiverse.com/thing:1008 ]
Scaled down for 1/8th inch material thickness, it was just too thin, so I decided to double it up, and added some #4 screw holes to hold it together while I glued the material.
Scaled down for 1/8th inch material thickness, it was just too thin, so I decided to double it up, and added some #4 screw holes to hold it together while I glued the material.
Recent Comments
view all
I don't have corel draw, so I can't really speak to your issue, but I can say it works fine in illustrator.
I'll upload a pdf later, maybe that will help.
Hi asp55,
I am importing the file into corel draw and all it shows is 12 little holes no out line am I doing something wrong?
thanks
Just downloaded and checked. Nope, all 6 are in there.
2102
357
Report Thing as Inappropriate
Remixed From
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
1) Cut from 1/8th inch thick material.
2) Apply glue between matching layers.
3) Screw together until glue dries
4) Remove screws and solve this motha-shut-your-mouth.
2) Apply glue between matching layers.
3) Screw together until glue dries
4) Remove screws and solve this motha-shut-your-mouth.
Download All Files
(29 kb zip file)
Comments
You must be logged in to post a comment.
I don't have corel draw, so I can't really speak to your issue, but I can say it works fine in illustrator.
I'll upload a pdf later, maybe that will help.