Replacement part for "Croozer" bicycle trailer
by ffleurey, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the plastic square which is at the end of the bar which connects to the bicycle.
These 2 parts are initially glued at the end of the bar but mine came lose after a while and I ended up losing one of them. These replacement should work just ad the original. I have printed them out of PLA, we will see how long they last.
Print the 2 parts and glue them together just like the original parts.
EDIT: The fit on the bicycle side was a bit tight so I made a new set with 16.8 mm for the inner square. The files for this version are the "168" STL files.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Replacement part for "Croozer" bicycle trailer by ffleurey is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ffleurey a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ffleurey would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).