Clamp mounted spool holder
by henriksson19, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is derived from:
I'm using a very small table for my printer. So I need a spoolholder
that is not wasting any of the space.
Made in Blender .blend files included.
This can be done with many variations this is what i used:
(I've printed mine in 0,3 layers with 20% infill.)
You will also need:
4x 350mm M8 threaded rod
1x 230mm M8 threaded rod
2x spool hub (http://www.thingiverse.com/thing:41692)
12x M8 wingnuts
16x M8 nuts
2x M8 large washers
20x M8 washers
The pictures shows how it all goes together.
(Click on "View Full Size")
Clamp mounted spool holder by henriksson19 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving henriksson19 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure henriksson19 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).