by ROBK636, published
This is the main part of a Fathers Day / Birthday for my dad.
The parits used for this are.
Amp - 2x100W @ 4 Ohm TK2050 Class-D Audio Amplifier
Pot (volume Control) - 50K Audio Taper Stereo Potentiometer
Audio In - 3.5mm Stereo Panel Mount Jack
Audio Out - Neutrik RCA Jack
Switch - SPST Automotive Round Rocker Switch w/Blue LED 12V
Power - Gutted laptop powersupply 18v @ 3.42A
Your choice on what you connect it to. I have it running to 4 Dayton Audio HDN-8 (http://www.parts-express.com/pe/showdetl.cfm?partnumber=300-387)
Modify to fit your parts or size you desire.
Liked Byview all
Give a Shout Out
Laser laser cut front/ back plate aswell as base. 1/2" wood is used to form the sides and top with a 1/2" router bit used on top.
Size is 7.5"L x 5.5"W x 2.75"H.
I was not able to finish the wood top and sizes in time they will be made soon an installed. I used some scrap 3/4"oak to hold together for now.