CMM - Renishaw REVO
by tbm0115, published
A simple model (mostly to scale) of a Renishaw REVO head. The design allows The A axis to move close to the same amount as with the actual head. There is an insert on the A axis that you can insert "Probe tips" into (currently working on models). Finally, there is a 1/2 inch hole in the top of the B axis to do whatever with.
The intent for this model was to use the part as an offline programming reference for clearance.
The model is in inches, so must be scaled to inches. The gap between "mechanical" surfaces are all about 0.100". I would also recommend using no more than 2 shell layers.