Continuous Fish Feeder
by CopabX, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The last feeder had a limited amount. This one is designed for pellets around 2 mm in size or smaller and can feed whatever amount you want for a pretty long time. It's designed to fit a Vex motor or servo. I'm not sure what the exact production spec is but if someone knows please post.
Print then program. If the pellets are having trouble falling, a sketch pattern was the solution for me, a short full power jerk opposite and then a slow opposite turn farther to fill the hopper.
There are 2 designs for the inside wheel. I recommend the one-notch one for less amount but more accurate feeding and the multi-notch one for those with larger fish that eat steak for breakfast.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Continuous Fish Feeder by CopabX is licensed under the All Rights Reserved license.
What does this mean?
- Remixing or Changing this Thing is not allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving CopabX a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CopabX would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).