low pressure switch enclosure for 6mm momentary switch
by calebkraft, published
Part of a hackaday.com to make a game controller for people with physical disabilities
You can also contribute at www.thecontrollerproject.com
This case uses a simple lever design to reduce the force necessary to push a 6mm momentary switch from 60 grams down to about 15grams of pressure.
there are two versions here. One that snaps together and one that is more rugged that will need to be drilled. I use a piece of paperclip as a hinge on the more rugged one.
Liked ByView All
Give a Shout Out
low pressure switch enclosure for 6mm momentary switch by calebkraft is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure calebkraft would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).