Contraptor - linear rail
by albanetc, published
0
Share
4035
1264
Report Thing as Inappropriate
Description
This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org
Linear rail comes in several lengths: 6", 12", 18", 24" etc. Attached DXF file and part list are for 12" long linear rail.
The rail can be attached to perforated angle, channel or T-slot profile, such as 80/20 Fractional 10 series. A pair of rails and at least a pair of linear bearings thingiverse.com/thing:1075 are needed to make a complete linear stage.
Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-rail
Linear rail comes in several lengths: 6", 12", 18", 24" etc. Attached DXF file and part list are for 12" long linear rail.
The rail can be attached to perforated angle, channel or T-slot profile, such as 80/20 Fractional 10 series. A pair of rails and at least a pair of linear bearings thingiverse.com/thing:1075 are needed to make a complete linear stage.
Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-rail
4035
1264
Report Thing as Inappropriate
Tags
License
Contraptor - linear rail by albanetc is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Linear rail is assembled from perforated aluminum channel and a pair of 1/4" drill rods, placed on square nuts and held by flat head screws. Perforated aluminum channel can be made in a way similar to that of perforated angle.
Detailed howto: contraptor.org/make-linear-rail
Detailed howto: contraptor.org/make-linear-rail
Contraptor - linear rail by albanetc is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(46 kb zip file)
Comments
You must be logged in to post a comment.
