Contraptor - linear bearing
by albanetc, published
0
Share
3485
2487
Report Thing as Inappropriate
Description
This thing is a part of Contraptor - a DIY open source construction set for building Cartesian robots: contraptor.org
Linear bearings ride on linear rail thingiverse.com/thing:1071, driven by belts or leadscrews. A pair of rails and at least a pair of linear bearings are needed to make a complete linear stage. There are three sizes of the linear bearing: 3.5", 2.5" and 1". The part list is for 3.5" size.
Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-bearing
Linear bearings ride on linear rail thingiverse.com/thing:1071, driven by belts or leadscrews. A pair of rails and at least a pair of linear bearings are needed to make a complete linear stage. There are three sizes of the linear bearing: 3.5", 2.5" and 1". The part list is for 3.5" size.
Sketchup source:
sketchup.google.com/3dwarehouse/search?q=contraptor+linear-bearing
3485
2487
Report Thing as Inappropriate
Tags
License
Contraptor - linear bearing by albanetc is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Linear bearing is basically half of aluminum rectangular tube, with R3 bearings mounted on 10-24 screws. The tube pieces are made using SVG templates. There is a 1/16" gap between bearings and the base wall. For 1" size, 1.5" square tube is used.
Detailed howto: contraptor.org/make-linear-bearings
Detailed howto: contraptor.org/make-linear-bearings
Contraptor - linear bearing by albanetc is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(142 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
