Iron Man chest piece
by Jumpyboy, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The light in this Iron Man chest piece is a Electroluminescent (EL) Panel/sheet. You need to make sure the EL sheet is cuttable (THE 3RD PHOTO IS WHAT YOUR SHOULD LOOK FOR). An A5 EL sheet will roughly cost you $26-$36 AUS off ebay (the inverter should come with the EL sheet).
Its all put to getter by using Araldite 2 part mix.
The bottom elastic band loop will do the job (make sure it is tight). The elastic band / velcro strip is held together with Araldite. The top loop are there just if someone needs it.
Any questions please comment
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Iron Man chest piece by Jumpyboy is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Jumpyboy a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Jumpyboy would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).