Dark Mask - Jointed

by bqLabs, published

Dark Mask - Jointed by bqLabs Oct 19, 2015

Featured Thing!

24 Share
Download This Thing! Customize Order This Printed Tools & Utilities

Thing Info

22763Views 7074Downloads Found in Costume
Report Thing


Create your own articulated frightening mask. You just have to print two parts and fit the axis of the jaw. Then, add a thin elastic cord to open and close the jaw.
More info: http://diwo.bq.com/builds/imprime-tu-mascara-para-halloween/

Author: http://www.thingiverse.com/Shira/about

Print Settings

Rafts: Sin importancia

Supports: Sin importancia

Resolution: Layer height(mm): 0.2

Infill: 10%


Printed pla 210º (c) No need to add supports. Only the top of the mask advise add to improve adherence: Brim or raft. The lower piece of the mask has a small support that you must remove before join the two parts


1- Remove support material
2-3 Turn the jaw and introduce the joint into the slot. 2-join 3-slot
4-Add a thin elastic cord (1mm -1.5mm diameter)
5-To attach the mask to the head, intruduce by an elastic cord holes

More from Costume

view more

Thing Info

22763Views 7074Downloads Found in Costume
Report Thing

Liked By

View All

Design Tools

Blender Sculptris


Dark Mask - Jointed by bqLabs is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This App connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file for p...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Everything worked perfectly and slide together nicely. I love the amount of detail you put into this project and I can honestly say you should be proud of your work! Thank you for the wonderful design.

I started the top half of the print earlier tonight but had to stop it roughly 35mins in when the right part of the teeth popped off the bed right when the print was about to start connecting all of the teeth parts. So the orientation I used was Top down. Should I have oriented a different way? I'm going to try again tomorrow after I slow down the print speed.

4 more try with different nozzle abd retraction speeds and the left side still pops off the bed within the first 15mins of printing. Gonna. Try using a raft this next go.

You have been featured as one of the Top Halloween models for the year! To see your model and other Halloween models search this in google and click on the first link: "3D Printing Ninja Top Halloween"

Are supports needed?

Oct 31, 2015 - Modified Oct 31, 2015
Witets - in reply to Jonathan2016

it says no. supports come with the design and are only at the hinges for the jaw. im actually making the top half now

This is very nice! It printed well, fit well, looked cool! so, all in all well done!

What kind of PLA is that used for the "purple" / shiny mask?

Yes Purple but not shiny. I applied some spray bronze.