Loading

Crank Gear

by Nicholas, published

Crank Gear by Nicholas Jun 29, 2013

Tags

License

Crank Gear by Nicholas is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Using the following options:

MusicCylinderNamePosition = 0
crankAxisHolderH = 1.55
gearH = 3
MusicCylinderNameDepth = 0.6
MusicCylinderName = test song
midBigTeeth = 20
E_PLA = 8240000
baseFrequC0 = 16.3516
epsilonCSG = 0.1
diametral_pitch = 0.6
snapAxisSlack = 0.35
crankGearAngle = 15
ro_PLA = 924
GENERATE_PULLEY = 0
midAxisHolderH = 3.3
MusicCylinderNameFontSize = 8
GENERATE_CRANK_GEAR = 1
crankLength = 18
midGearAngle = -5
axisSlack = 0.3
midSmallTeeth = 8
crankExtraH = 4
gear_min_gap = 0.1
gear_hold_R = 4
pulleySnapL = 1.2
pteethMinD = 1.5
gear_gap = 1
crankTeeth = 8
gear_tolerance = 0.1
DEBUG_GEARS = 0
MusicCylinderNameFont = write/Letters.dxf
pulleySlack = 0.4
teethNotes = C 0C#0D 0D#0E 0F 0F#0G 0G#0A 0A#0B 0C 1C#1D 1D#1E 1F 1
GENERATE_CRANK = 0
gammaTooth = 1.875
GENERATE_MUSIC_CYLINDER = 0
wall = 2
crankDirection = 0
teethHolderH = 5
teethHolderW = 5
crankAxisCutAwayH = 4
pinNrY = 35
pinNrX = 13
GENERATE_MID_GEAR = 0
crankSlack = 0.2
pulleyH = 10
noteAlpha = 5
musicCylinderTeeth = 24
crankAxisR = 3
GENERATE_CASE = 0
FOR_PRINT = 1
musicAxisHolderH = 3.4
$fn = 32
pinD = 1.5
pinH = 3
pins = XoooooooooooooXoooooooooooooXoooooo oooooooXoooooooooooooXooooooooooooo XoooooooooooooXoooooooooooooXoooooo oooooooXoooooooooooooXooooooooooooo XoooooooooooooXoooooooooooooXoooooo oooooooXoooXooXoooooooooooooooooooX oooXooXoooooooooooooooooooXoooXooXo ooooooooooooooooooXoooXooXooooooooo ooooooooooXoooXooXooooooooooooooooo ooXoooXooXoooooooooooooXooXoooXoooo oooooooooooooooXooXoooXoooooooooooo oooooooXooXoooXoooooooooooooooooooX ooXoooXoooooooooooooooooooXooXoooXo ooooooooooooooooooXooXoooX
Top