Loading

Pulley

by Nicholas, published

Pulley by Nicholas Jun 29, 2013

Tags

License

Pulley by Nicholas is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Using the following options:

crankAxisCutAwayH = 4
MusicCylinderNamePosition = 0
GENERATE_CRANK = 1
gear_hold_R = 4
pulleyH = 10
axisSlack = 0.3
gear_tolerance = 0.1
crankAxisHolderH = 1.55
GENERATE_CASE = 0
GENERATE_CRANK_GEAR = 0
crankSlack = 0.2
gear_gap = 1
midBigTeeth = 20
teethNotes = C 0C#0D 0D#0E 0F 0F#0G 0G#0A 0A#0B 0C 1C#1D 1D#1E 1F 1
pinNrY = 35
pinNrX = 13
MusicCylinderNameFont = write/Letters.dxf
midSmallTeeth = 8
crankExtraH = 4
gear_min_gap = 0.1
MusicCylinderNameDepth = 0.6
GENERATE_MID_GEAR = 0
crankLength = 18
GENERATE_MUSIC_CYLINDER = 0
wall = 2
teethHolderH = 5
teethHolderW = 5
musicCylinderTeeth = 24
baseFrequC0 = 16.3516
pulleySlack = 0.4
GENERATE_PULLEY = 0
epsilonCSG = 0.1
diametral_pitch = 0.6
snapAxisSlack = 0.35
crankGearAngle = 15
gammaTooth = 1.875
pinD = 1.5
pinH = 3
pins = XoooooooooooooXoooooooooooooXoooooo oooooooXoooooooooooooXooooooooooooo XoooooooooooooXoooooooooooooXoooooo oooooooXoooooooooooooXooooooooooooo XoooooooooooooXoooooooooooooXoooooo oooooooXoooXooXoooooooooooooooooooX oooXooXoooooooooooooooooooXoooXooXo ooooooooooooooooooXoooXooXooooooooo ooooooooooXoooXooXooooooooooooooooo ooXoooXooXoooooooooooooXooXoooXoooo oooooooooooooooXooXoooXoooooooooooo oooooooXooXoooXoooooooooooooooooooX ooXoooXoooooooooooooooooooXooXoooXo ooooooooooooooooooXooXoooX
crankAxisR = 3
noteAlpha = 5
musicAxisHolderH = 3.4
gearH = 3
crankTeeth = 8
midGearAngle = -5
MusicCylinderNameFontSize = 8
$fn = 32
ro_PLA = 924
crankDirection = 0
midAxisHolderH = 3.3
E_PLA = 8240000
DEBUG_GEARS = 0
MusicCylinderName = test song
FOR_PRINT = 1
pulleySnapL = 1.2
pteethMinD = 1.5
Top