Spool Rack - Modular, Vertically Stacked
by hayyyhoe, published
Homemade spool rack for Ultimachine Spools. You supply the 1" dowel and you can print the rest of the parts, 4 unique parts total. This rack allows you to store multiple spools with the ability to grab whichever one you need without removing other spools.
This is my 2nd iteration with tighter fits on all of the parts. Feedback is appreciated for Rev 3 (if needed).
Recent Commentsview all
Liked Byview all
Give a Shout Out
I built the feet on their side with supports. Be sure to build at medium or better quality, with 3 shells and 20% infill or greater. The feet carry a lot of weight and my first build at low quality de-laminated and broke too easily. Brackets can be build on the flat side with no supports. Same notes on infill and shells, as these need to be strong. Build the Panel vertically with supports to fill the 4 holes. Cut your 1" diameter dowel to whatever length you need for your desired spool capacity. It took me about a week of building here and there to gather all of the parts to build a 5 spool rack.