Adjustable Belt Splitter - Inch
by woof3d, published
This is an adjustable belt splitter based on the RepRap belt splitter jig found here: http://reprap.org/wiki/Belt_splitter_jig
There are four width options to split at:
A - 1/4th inch
B - 1/8th inch
C - 3/16th inch
D - 5/16th inch
1 Standard Box Cutter Blade
4 M4x40 cap
4 M4 nut
Same concept as found here:
Place the notched Width Adjuster at the desired width.
A : 1/4th inch
B : 1/8th inch
C : 3/16th inch
D : 5/16th inch
!Warning: Blade edges will be exposed!
Liked ByView All
Give a Shout Out
Adjustable Belt Splitter - Inch by woof3d is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving woof3d a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure woof3d would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).