Motorcycle throttle lock

by toofuu, published

Motorcycle throttle lock by toofuu Jul 1, 2013

Thing Info

6920Views 770Downloads Found in Sport & Outdoors
Report Thing


Locks throttle against brake lever, rest your right hand on long straight roads.
It worked for my Ninja 250R, modify size to suit your needs.

*Added .STL file.

More from Sport & Outdoors

view more

Thing Info

6920Views 770Downloads Found in Sport & Outdoors
Report Thing


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

No more unsafe than any other throttle lock in use, no matter what the design.
My question is: How do you get this around the throttle? I've made two and both have snapped at the hinge end. How solid are you printing these to get them to bend enough at the hinge to go around the handle while still being strong enough to grip tightly?

I use a hair dryer first to soften it, got to the smallest point then put it back. worked like a charm

What do you do with a thing file?

Can we get this as a .stl file?

Come on guys... I've been using one of these for the last 4 years.

The way these work is that you throttle down when you're about to come to a stop which move the lever and then you apply the brake.

It becomes very natural after a short while. Btw this is not a new thing and has been around for years now.

Don't know if you guys against this actually drive motorcycle?
I doubt it since you should have seen these around.

So let's relax with the unsafe this and that, and realize that pretty much anything can be unsafe in the right (or wrong) hands!

Seems totally unsafe to me. But bartek66.. link points to fact there seems to be a market for that.

On the other hand you could use it to pick pickles from a jar....

Very bad design! Where is button 'dislike' here?
In case of emergency braking, lever will move throttle up.
In case you felt down, bike will continue its wild uncontrol trip, and may hurt somebody.

Heres what you needhttp://media.meta.ua/files...

You're right, if you make it too tight and fix it firmly on the throttle.
It's intended to slip and close the throttle on braking, users may need to fine tune the size for their motorcycles.
Good point, maybe need more description.