57mm Automotive Gauge pod plug
by PsycosisNine, published
This is a standard 57mm automotive gauge pod / hole filler. I decided that this would be use full for all the DIY Car guys out there. I noticed I can pick up a voltage meter off of ebay for like 1.25 and I can print this and cut (or print with the hole already) a hole out for the voltage meter.
This is my first 3d model, and it did successfully print. if you have any questions please let me know. Also for some reason when i load this into cura i have to scale it... if you can help me pop me a PM
Figured it out. the Volt gauge has the proper size no need to scale!
Liked ByView All
Give a Shout Out
57mm Automotive Gauge pod plug by PsycosisNine is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving PsycosisNine a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PsycosisNine would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).