Gear Coasters for CNC
by PxT, published
I wanted to mill the coasters from thing:7796 on my CNC but the design assumes a laser and isn't appropriate for the thicker kerf of a CNC cut. I split out the pieces so they can be milled more easily. The included DXF file is for one coaster, make four or more for a set.
You may need to edit the size of the little tabs. The length should be equal to 4x the thickness of your material if you are making a set of four. The width should be equal to the thickness of the material. Edit the small square cutouts to be that same width/height as well.
Liked ByView All
Give a Shout Out
Gear Coasters for CNC by PxT is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure PxT would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).