Miniature Taj Mahal - Updated 9.3.2011

by tc_fea, published

Miniature Taj Mahal - Updated 9.3.2011 by tc_fea Sep 1, 2011

Featured Thing!

Thing Info

8632Views 3113Downloads
Report Thing


This is a simplified miniature Taj Mahal.

I recommend using the latest version of the .stl file: taj_mahal_110903e_ctr.stl.

I modified the design to reduce thermal warping and use about 15% less plastic. I could not get the original file to print properly on my older cupcake due to thermal warping.

The picture shows the ...110903e file printed at 80% size. It printed in 2 hours and 2 min.


Full size is a larger print, so center your platform and set the raft size a bit close.

Thing Info

8632Views 3113Downloads
Report Thing

Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

I wasn't expecting it to be hollow, will use less plastic that way though. I'm printing one .5 smaller at .15mm layer height in glow in the dark plastic on my Thing-O-Matic right now. Will post pics when done. The estimate says 1 hour and 15 seconds to go.

If you clean it up with Acetone it gives the glow in the dark material almost a ceramic look. And the glow part is epic.

I'll have to give that a shot.

maakit. i like the 2 color print

Botbuilderdotnet, I forgot to mention ealier that that is awesome lighting arrangement for the build and your bot!

you use solidoodle? how is it?

tc_fea - in reply to owais

I ordered one, but have not received it yet. :)

nice print woofpickle. unfortunately my full size print on an older cupcake messed up half way thru. I printing an 80% size now.

I had to slightly resize mine, because of my Cupcakes current configuration, I had resize it to where it was right at 80mm x 80mm.