by PuZZleDucK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I wanted to print 4 crackers on a plate at 70%, but they did not scale well... the inner tube was too thick (and I also thought didn't need a lot of the material).
Additionally the "roof" of the inner tube would print badly without supports.
So this version trims the inner tube and makes it a little thinner fixing most of those issues, It can now be layed flat without a roof. I have also printed at 50% for an electronics setup which worked a treat.
Beware yee who scale smaller than 50%, It be untested waters :D
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Scalable Cracker by PuZZleDucK is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PuZZleDucK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PuZZleDucK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).