by FoxRobotics, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I decided to add the new (at this time) Prusa i3 bed to my older Prusa i1. In order to do that, I needed an end stop that was recessed a tad. The endstop as shown here extends the switch out 31mm from the center of it's attached rod.
This is designed to mount to an M8 threaded rod and use an M4 screw for the clamp.
The switch mounting hole is slotted to allow you to move it up and down which should accommodate many different arm types.
Printed using orange Octave ABS.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Extended Endstop by FoxRobotics is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving FoxRobotics a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FoxRobotics would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).