Reprap Teardrop Shot Glass
34
Likes
853
Downloads
1982
Views
Published on September 27, 2011
Description
Having finally gotten my printer to produce clean prints, I decided it was time to celebrate, which means making the obligatory shot glass :-)
I decided I wanted something reprap related, so I designed a shot glass in the shape of a hollowed out, tapered reprap teardrop.
I decided I wanted something reprap related, so I designed a shot glass in the shape of a hollowed out, tapered reprap teardrop.
Instructions
Print, fill with your favorite alcohol, drink.
Actually, unless you coat it with food grade urethane first, I wouldn't suggest using it.
The walls are just a fraction more than 2mm thick, so I printed it with 2 extra shells, and an extrusion width of 0.424, which results in a filament spacing of 0.333, and produces a solid wall with no center gap.
Actually, unless you coat it with food grade urethane first, I wouldn't suggest using it.
The walls are just a fraction more than 2mm thick, so I printed it with 2 extra shells, and an extrusion width of 0.424, which results in a filament spacing of 0.333, and produces a solid wall with no center gap.
You must be logged in to post a comment.
License
Reprap Teardrop Shot Glass by raldrich is licensed under the Attribution - Share Alike - Creative Commons license.
More from raldrich
More from 3D Printing Tests
Natureworks PLA is supposedly FDA approved for food contact and storage. Not sure if that stands after pigments are added and it's extruded into filament.