Thingiverse

Printable Useless Box

Pombo
1999
Downloads
1676
Views
Published on September 29, 2011

Description

This is a 100x150x68cm box made with openSCAD.

EDIT 09/30/2011 : I've added the .scad files in the .rar. The names are in French so I hope it's clear enough. I've made the shoulder and the arm after i've fixed my box size, therefore if you wish edit parameters everything might not realign correctly.

EDIT 10/09/2011 : I've cut the bottom part and the shoulder in half to be printed on a Makerbot.

Instructions

You will need two hinge, a standard servo modified for continious rotation , a DPDT, a switch and some screws/nuts.
Tags
This Thing has no tags.
Report as inappropriate

You must be logged in to post a comment.

mschrock on February 22, 2013 said:

I struggled with warping issues when printing the whole bottom part with ABS. I finally decided to print the Makerbot sized parts with success.

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

sorry it posts my posts multiple times...

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

actually the shoulder 1 is still too long... maybe you could break up the shoulder in half horizonntally instead of verically? please? (i really dont know the first thing about openscad but i'd really like to have one of these machines...)

tarturo on October 9, 2011 said:

thanks that's great, will begin printing it asap...

tarturo on October 9, 2011 said:

could you please make it fit on a makerbot 100x100 platform, maybe cutting the base in two?

Pombo on October 9, 2011 said:

I cut the shoulder in 3, its is cleaner than what I have made earlier and it should fit in.

Pombo on October 9, 2011 said:

Voila, but i don't have a Makerbot so i can't check if it fits (especially the shoulder). You will need M4 bolts to join the bottom parts.

cymon on September 30, 2011 said:

Dang it, beat me to it. I so wanted to be the one to make this printable.

Well, I suppose I can still do the wind-up version.

Anonymous on September 30, 2011 said:

This is amazing, scad files please

qharley on September 30, 2011 said:

Would you mind dropping us the SCAD file...

Metaphor of the times

whosawhatsis on September 30, 2011 said:

I've been wanting one of these. Just need to make the hinges printable.

cymon on September 30, 2011 said:

There are lots of printable hinges. Why this one wasn't built with them I don't know. Yeah, needs to have printable hinges.

Collections

View all
just for fun
by minti42
Things to Make
by Mmfox
Things to Make
by foxpup

Remixes

Made

View all

Liked by

View all

License

Printable Useless Box by Pombo is licensed under the Attribution - Share Alike - Creative Commons license.

More from Pombo

⇪