Servo Suspension System
by guibot, published
2
Share
Description
SSS (servo suspension system) is designed to support standard servo motors and act as a basic suspension. It is still a work in progress and has not been tested yet.
Will update results soon.
Will update results soon.
Recent Comments
view all
endeed a major upgrade! this was my first print ever made a couple of years ago, never worked on it since then!! thank you for commenting ;)
I agree; very cool design.
It might reduce unwanted motion if you used one of each on each servo, so the "springs" cross. This would still allow it to go up/down, but motion in the other two axes would be restricted. Of course, it would also be twice as stiff, but the stiffness might need to be adjusted as it is (depending on the mass being suspended).
Holes should be added for screws.
Makes
Tags
License
Servo Suspension System by guibot is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
You should print the left and right thingy, check the .stl files.
Servo Suspension System by guibot is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(7 kb zip file)
I agree; very cool design.
It might reduce unwanted motion if you used one of each on each servo, so the "springs" cross. This would still allow it to go up/down, but motion in the other two axes would be restricted. Of course, it would also be twice as stiff, but the stiffness might need to be adjusted as it is (depending on the mass being suspended).
endeed a major upgrade! this was my first print ever made a couple of years ago, never worked on it since then!! thank you for commenting ;)