Loading

Power distribution box

by Worm23, published

Power distribution box by Worm23 Nov 2, 2009

Description

The idea is to put a power distributor in the box and jam it in between of two tables. The power conectors are now easily accesible and there is no tablespace wasted.
Come and take a look at the showcase in the metalab.at Hackerspace! :)

Recent Comments

view all
Great idea.
I don't think that this woud be a problem(I've seen far worse locations for a power distributor ;) ) but to be on the save side I'll add this in the next revision.
Great work - the tables at metalab look so much neater now.

I notice that the covered part (the one with "Metalab powerz" on it gets a bit warm (not very, just enough to be noticable) - might be a good idea to have some narrow ventilation slits in there.

Liked By

view all
Dragonfly on Black Acrylic

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Cut out of 6mm plywood, assemble with M3 skrews, use the false bottom for additional wiring and fixation of the power distributor.
Great work - the tables at metalab look so much neater now.

I notice that the covered part (the one with "Metalab powerz" on it gets a bit warm (not very, just enough to be noticable) - might be a good idea to have some narrow ventilation slits in there.
Great idea.
I don't think that this woud be a problem(I've seen far worse locations for a power distributor ;) ) but to be on the save side I'll add this in the next revision.
Top