by tobyjaffey, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A tiny loom for weaving.
Has a frame, a comb for compacting each row and a needle.
There are many different ways to use this. Here's one:
Cut two short lengths of string, hold parallel, tie one set of ends together. Place knot over one tooth of the loom. Pull tight and tie the other end over the opposite knot.
Continue until all teeth have a pair of strings.
Weave under, over, under, over from side to side. Don't go around the frame. After each row, neaten up using the comb.
When finished, tie up. Slide each of the knots off of the teeth.
Laser cut from 3mm ply or acrylic.
Upgrade this Thing with Thingiverse Apps
MicroLoom by tobyjaffey is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tobyjaffey a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tobyjaffey would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).