RP shelf support
2
Likes
271
Downloads
274
Views
Published on October 9, 2011
Description
Going in a new home I needed to add some shelf to the new wardrobe. So I designed a support that can be printed with a RepRap.
The support is made for fit on a screw head and hide it.
I inserted an image to show OpenSCAD parameters meaning and one example STL file.
The STL file is just good for my particular screws and RepRap, use it only to make an idea: you have to tune the parameters to your specific needs!
Full design story and more details on my blog:
resco-research.com/blog/tutorial-design/design-story-1-shelf-supports
The support is made for fit on a screw head and hide it.
I inserted an image to show OpenSCAD parameters meaning and one example STL file.
The STL file is just good for my particular screws and RepRap, use it only to make an idea: you have to tune the parameters to your specific needs!
Full design story and more details on my blog:
resco-research.com/blog/tutorial-design/design-story-1-shelf-supports
Instructions
1) download the .scad file
2) change the parameters to fit your screw
3) print few supports
4) if you screw doesn't fit go back to point 2)
5) mount 4 screw in you wardrobe
6) fit 4 shelf support
7) place your shelf
2) change the parameters to fit your screw
3) print few supports
4) if you screw doesn't fit go back to point 2)
5) mount 4 screw in you wardrobe
6) fit 4 shelf support
7) place your shelf
License
You must be logged in to post a comment.