The Wire Beings Beta Arduino Robot
by MatthewHallberg, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an expandable robot chassis. You can find the basic bluetooth build instructions here:
Building it is quick but it takes approximately 35 hours to print in its entirety. All the .stl files are here, separated for 3d printing, but the entire design is here under robotLatest.123dx for 123d Design. If your just doing the basic bluetooth build that I have made instructions for, you don't need to print the neckOneServo.stl piece or the neckBothServos.stl piece. Those are just in case you want to add motion to the head. neckOneServo.stl is up and down, and neckBothServos.stl is up down, and left to right (not demoed in the video because it doesn't work that well).
If you have any questions I would be glad to help, I am sure there are some things I missed.
Everything prints pretty nicely, if I remember correctly you only need supports when printing the middle pieces. I would definitely use a raft on both face pieces. I did not use a raft when doing mine because I was too impatient and I got a lot of warping and poor adhesion.
How I Designed This
This was designed in 123d design because I thought it would be easier for younger people to change designs of the face or whatever else they wanted to edit.
Edit, personalize, or revise this Thing
The Wire Beings Beta Arduino Robot by MatthewHallberg is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving MatthewHallberg a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MatthewHallberg would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).