Simple spool holder (no screws, no rods)
by virtualabs, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple spool holder
I designed this spool holder for ~50mm mount hole diameter spools, with simplicity in mind. It requires no screws nor rods, just print the parts and assemble as shown in the design.
- 1 plate
- 1 central ring
- 1 stand
Once the parts printed, insert 3 608zz bearings as shown, clip the central ring into the plate (you should clean this part before inserting) and put the plate onto the stand. It is now ready to use !
Place your spool horizontally and let the magic begins.
Prusa i3 rework
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Simple spool holder (no screws, no rods) by virtualabs is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving virtualabs a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure virtualabs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).