Kitten by MBCook - Thingiverse

Kitten

MBCook

Likes

1512

Downloads

2285

Views

Published on October 19, 2011

Description

I took Bruno Levy's model of a stone kitten published on AIM@Shape[1] (specifically the "kitten quads" file) and processed it a little. I fixed minor issues (such as flattening the base) so I could print it out.

[1] shapes.aim-at-shape.net/viewgroup.php?id=270

Instructions

You'll need full exterior support to print the model, the head is just too big and has too much overhang.

Tags

This Thing has no tags.

Report as inappropriate

Wired1 on January 17, 2013 said:

Printed at .15mm layer height in PLA without support on my OB1 printer no problems. The photo is as it came off the printer not even cleaned up :)

Proksis on January 14, 2012 said:

Printed with and w/o raft - 3 mm PLA green transculent 210 deg C (raft 190), 0.25 mm layer, linear fill-pattern, netfabb + axon2 (+ Chyllds derafter for derafted version) on RapMan 3.1 with firmware 4.2.1s and some little improvements, (1 h 43 min print time each kitty)

crazysocket on November 4, 2011 said:

i can't print this perfectly like u all. do you mind sharing your setting?

crazysocket on November 14, 2011 said:

nice one, will download it. haven't has time to try with support yet. i think i should jz find a time to play with skeinforge setting before printing it.

rgoodwin on November 4, 2011 said:

Not sure if you're talking to me or declan...there are so many settings, I'm not sure if they transfer to your printer...if you like, mail me at friends AT richardgoodwin DOT com and I'll mail you my SF profiles. They are for Mosaic which is a .35 nozzle.