Low Profile Snow Tires for OpenR/C F1 car
by Palmiga, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
2017-04-21 added versions for the wider rear 2017 wheel
PLEASE RESPECT THE LICENSE AND GIVE CREDIT TO THE DESIGNER!
Custom order by Daniel Norée...His "Snow Chains" idea now designed and visualized...
I have also included an early ice inspired Easter Egg for this release, I do not promote or support any special use or ideas on how to use it... everyone´s ideas and uses are on their own responsibility. I emphasize that anybody using my designs are doing so on their own risk and that I am in no way responsible for any likely or unlikely damage or injuries.
"Palmiga_openrc_F1_LTsnow_8mm" WILL NOT FIT ORIGINAL CAR!!!
Use these rims: http://www.thingiverse.com/thing:1103751
PI-ETPU 95-250 Carbon Black is a professional 3D printer flexible and conductive filament
Don´t need the conductivity?
Well the conductivity is great for some things but perhaps not your first choice? Then consider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very harsh environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•The elongation at break is only 250%.
For more info regarding release of the F1 car and also the other Open-RC project head over in this direction: http://danielnoree.com/
For OpenR/C Formula 1 print-files (after release) go here: https://pinshape.com/users/18846-danielnoree
For my designs check out http://www.thingiverse.com/Palmiga/designs & https://www.instagram.com/rubber3dprinting/
Due to the nature of 3D printing / material used etc... Keep in mind that you use my designs on your own risk and that I in no way is responsible for any damage och injuries.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Low Profile Snow Tires for OpenR/C F1 car by Palmiga is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Palmiga a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Palmiga would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).