Wireless NES Controller Case and Receiver Box
by thepoorstudenthobbyist, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the back of the NES controller, with added depth for supporting electronics, and a simple box for the receiver. I used this model in my wireless NES controller project, over on my blog.
I use two ATMega328s and a wireless transmitter and receiver to wirelessly communicate between the controller and the NES. Check it out and my other electronics tutorials!
Probably works with other settings just fine, but I'd keep at least 0.2 resolution. I used a low fill for the support material.
I'm not sure if the dimensions of this is correct - I have to convert the model to inches when I go to print it on my printer. For reference, the controller should be about 5 inches long, and the receiver box and lid are about 2" x 2.75".
For those who do not want a hole for the switch, I provided a model without the hole, so that you can make your own.
Edit, personalize, or revise this Thing
Wireless NES Controller Case and Receiver Box by thepoorstudenthobbyist is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving thepoorstudenthobbyist a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure thepoorstudenthobbyist would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).