Microrax corner style joining plate AP30301
by microrax, published
0
Share
2402
726
Report Thing as Inappropriate
Description
Joins two MicroRAX or Mini-T 10mm profiles at a corner. Extra hole for diagonal, rubber foot or other accessory.
2402
726
Report Thing as Inappropriate
Tags
License
Microrax corner style joining plate AP30301 by microrax is licensed under the Attribution - Non-Commercial - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Use .080" - .130" aluminum for best results. Laser cut plastics are good and light weight.
Holes are sized to clear an M3 screw. Use a washer or shrink the holes to clear an M2 screw for Mini-T profile.
The tools listed are a range of tools that can be used to make the part, you won't need all of them.
A MakerBot, of course, will be the funnest way to make one.
Let me know if there are any file types that would help and I can add them. One of the few I can't create at the moment is Google sketch up.
Note: The DXF file looks blank but the geometry is there, I downloaded and checked it.
microrax.com
makerbeam.com
Holes are sized to clear an M3 screw. Use a washer or shrink the holes to clear an M2 screw for Mini-T profile.
The tools listed are a range of tools that can be used to make the part, you won't need all of them.
A MakerBot, of course, will be the funnest way to make one.
Let me know if there are any file types that would help and I can add them. One of the few I can't create at the moment is Google sketch up.
Note: The DXF file looks blank but the geometry is there, I downloaded and checked it.
microrax.com
makerbeam.com
Microrax corner style joining plate AP30301 by microrax is licensed under the Attribution - Non-Commercial - Share Alike license.
Download All Files
(8 kb zip file)
Comments
You must be logged in to post a comment.
