by jpearce, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A RecycleBot is a waste plastic extruder - that can take household polymer waste and turn it into valuable 3-D printer feedstock.
Information about the first RecycleBot can be found here: Recyclebot v1.0. This was a great proof of concept and based off of a hand-powered design - although fantastic from an environmental/appropriate technology perspective did not create filament of high enough quality to be particularly useful for open source 3D printers.
The design for the waste plastic extruder (Recyclebot v2.0 and v2.1) is heavily influenced by the Web4Deb extruder, which extrudes HDPE for use as a growth medium in aquaponics. Details of the Web4Deb design are here. As part of Mechanical Engineering course, that I supervised, Christian Baechler developed Recyclebot v2.0 an automated device to automatically convert household plastic waste into usable material to be fed into small scale rapid prototyping machines, such as the RepRap. This design was improved upon within the group - especially with the help of Matthew DeVuono to make v2.1. The results of this are extremely promising and the work will be published.
The RecycleBot work is now being carried out by members of the Michigan Tech in Open Sustainability Technology Research Group.
The v2.2 is -- I am sure over-designed -- but we needed a reliable tool (v2.0/v2.1 were made of wood and we kept breaking it and sending pieces all over the lab). I am sure the attached design is working though so felt ready to post.
Our goal is to have a fully automated system running off of an Ardruino. Imagine pressing a button for recyclable plastic 1-7, shredding your given plastic waste container in a office shredder, having the Recyclebot automatically shift its setting and output commercial grade 3-D printer filament while you go for lunch.
We are about half way there -- if anyone would like to help particularly on the controls side - please drop me a line. Improvements will be posted on a wiki first as we go and imported to Thingiverse when they are solid.
More info: Christian Baechler, Matthew DeVuono, and Joshua M. Pearce, Distributed Recycling of Waste Polymer into RepRap Feedstock, Rapid Prototyping Journal, 19(2), pp. 118-125 (2013).
How it works
The Recyclebot consists of 3/4" (inner diameter) piping divided into a gearing, hopper and heating section. Shredded plastic is fed into the hopper and transported to the heating section by a 3/4Ã¢â¬Â - 17" ship bore auger driven by a windshield wiper motor. Power is transferred from motor to auger using a sprocket and chain drive system with a 2:1 gear ratio to decrease speed and increase torque. The motor has a stall torque of 30Nm and runs at 35rpm on the low speed setting. The gearing section of the extruder body houses the auger and also provides support for a thrust bearing and collar used to counter axial force encountered during transportation of the ground plastic.
Plastic pushed into the heating section is melted and forced through a die producing plastic filament. The heating zone consists of insulated 14 gauge nichrome 80 wire wrapped around the barrel and secured with heat resistant Kapton tape. You can also use furnace cement between the piping and uninsulated nichrome to prevent short circuiting through the pipe at high temperatures. Fourteen gauge wire was chosen in an effort to create the heating zone with minimal power requirements. (Based on other work we are trying to create a completely solar powered distributed manufacturing tool set 3-D Printing of Open Source Appropriate Technologies for Self-Directed Sustainable Development.
Wire temperatures of 225C were achieved with 75W of power (15V, 5A). Temperature can be adjusted by altering the current passing through the nichrome wire - so that you can personalize the settings for a given polymer or mixture.
HDPE filament has been successfully produced with this method at an average rate of 90 mm/min and used to print parts. The filament diameter averaged about 2.8mm.
- Full mechanical assembly instructions
- Operation instructions
- Design improvements and post extrusion winding, cooling/solidification methods
- Experimental results on filament and RepRap print quality
- Tricks to print waste polymers successfully
Tools & Utilities Apps
Repair, slice, or enhance this Thing
RecycleBot v2.2 by jpearce is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jpearce a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jpearce would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).