lock&hook
6
Likes
102
Downloads
311
Views
Published on October 29, 2011
Description
This was created in reaction to the New Museum challenge and the simple question - what could we make that would make life easier. My partner replied "something to make sure your bathroom stall doesnt pop open and is also a hook for hanging a purse or jacket." The great features of the design are:
- it folds up for portability
- the weight of the purse or jacket is what keeps it in place and provides the locking power
- it can be printed in one build
- you can add words to the side if you want to mark it occupied in a personal way
This was not a derivative, but instead an original design. It is an attempt to solve a common problem with steel doors and their insufficient locks in public bathrooms. The very low expense means that it is affordable for all, and it can be scaled for your most common everyday situations if needed. (for instance if your office restroom has extra thick doors) The design includes a beveled slot so that it should adjust to most door sizes.
- it folds up for portability
- the weight of the purse or jacket is what keeps it in place and provides the locking power
- it can be printed in one build
- you can add words to the side if you want to mark it occupied in a personal way
This was not a derivative, but instead an original design. It is an attempt to solve a common problem with steel doors and their insufficient locks in public bathrooms. The very low expense means that it is affordable for all, and it can be scaled for your most common everyday situations if needed. (for instance if your office restroom has extra thick doors) The design includes a beveled slot so that it should adjust to most door sizes.
Instructions
Instructions for printing on your Makerbot:
Print in your desired color with one build. place the vertical part in the top part and then slide the pin thru both. A dab of plastic glue to fix the pin onto one or the other parts might be advisable. The pin is printed laying down for strength against shearing.
Instructions for use:
When you are in the restroom, take the lock&hook out of your purse or pocket and flip out the vertical piece as seen in the renderings. slide the vertical piece in between the door and door frame until the top rests on the door top. hang your jacket or purse for extra latching power.
Print in your desired color with one build. place the vertical part in the top part and then slide the pin thru both. A dab of plastic glue to fix the pin onto one or the other parts might be advisable. The pin is printed laying down for strength against shearing.
Instructions for use:
When you are in the restroom, take the lock&hook out of your purse or pocket and flip out the vertical piece as seen in the renderings. slide the vertical piece in between the door and door frame until the top rests on the door top. hang your jacket or purse for extra latching power.
You must be logged in to post a comment.
License
lock&hook by digitalcoleman is licensed under the Attribution - Share Alike - Creative Commons license.
More from digitalcoleman
now just add a foldaway step for those extra high stall doors, or the vertically challenged amongst us
Clever idea. Too many locks has been vandalized/re-appropriated out of the stall doors in some public places, and this would be the ideal solution to that.