Digital designs for real, physical objects. A Universe of Things!

Thingiview of FootSupport_left_front.stl

Thing O Matic corner support feet

Created by
elindow
Created on Nov 6, 2011
Derived from Thing O Matic risers by elindow

These are simple supports for the four corners of a TOM. They are the same height as the rubber feet, so they can be used either with or without the rubber feet attached. If you are using any of the printable feet designed to raise up you TOM, these supports will provide a more stable platform, prevent bowing of the bottom piece, and make it possible to move the upper part of the TOM around a bit without having to worry about the printed feet sliding off the bottom plate.

Here are the feet you might want to use:

Large feet by deltagear: thingiverse.com/thing:11414
Small feet by fillibar: thingiverse.com/thing:11812
Risers, by me: thingiverse.com/thing:13039

Downloads

Sort By

Date

Popular

File Type

FootSupport lef...stl

35 kb / 39 downloads / 7 months ago

FootSupport lef...stl

35 kb / 37 downloads / 7 months ago

FootSupport 2.skp

23 kb / 27 downloads / 7 months ago

They Like It

What's this?

Thing O Matic corner support feet by elindow is licensed under the Attribution - Share Alike - Creative Commons license.

© 2011 by elindow

Instructions

There is only a single Sketchup file for the two STL files. This is because you need to print a mirror image of the sketchup file to allow for the tabs on the left front and left back of the TOM. So you need to print four of these supports, with at least one of each type.

Once printed, just slide them under the corners of your Thing-O-Matic and enjoy the greater sense of stability:)

Required Tools

3D Printer

Thing O Matic corner support feet

Downloads

Tags

They Like It

Instructions

Required Tools

Comments

Latest From The Thingiverse Blog

Join Thingiverse®!

Things

Tools

Blog

About Thingiverse®