Loading

Agricola Storage Solution

by wtwerner, published

Agricola Storage Solution by wtwerner Aug 16, 2013

Description

This is a simple storage solution assembly based on the excellent writeup from BoardGameGeek user Cam Barker:

http://boardgamegeek.com/thread/444879/functional-storage-tricking-out-agricola-with-a

The base is probably too big for me to comfortably print so I may split it into a couple interlocking parts.

Edit 8/16/13: Updated all parts to appropriate/adjusted dimensions.

Edit 8/20/13: Decreased wall thicknesses for lower print time and more storage space, added tile grabber holes, increased fillet radius in nib tray to allow for easier sheep pick-up, split the base into two parts to make it printable.

Recent Comments

view all

If you've downloaded my split - I just uploaded the other half of the nib tray if you want the full design shown here... You can get away with two of the smaller prints or one of each..

swhit321 - I just did this myself for my own benefit - so here's the file I used. You'll need a minimum print bed of about 5"x6"... It will end up somewhat small compared to the opening - I just printed this file twice, so it ended up short of the opening below. It still fits all the bits, but it isn't "perfect". Works for me, though. :)

http://www.thingiverse.com/thing:643316

Is it possible for you to cut your nib tray in to two pieces, like you did the base?

More from Toy & Game Accessories

view more

Makes

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Is it possible for you to cut your nib tray in to two pieces, like you did the base?

If you've downloaded my split - I just uploaded the other half of the nib tray if you want the full design shown here... You can get away with two of the smaller prints or one of each..

Jan 20, 2015 - Modified Jan 20, 2015
bwebbink - in reply to swhit321

swhit321 - I just did this myself for my own benefit - so here's the file I used. You'll need a minimum print bed of about 5"x6"... It will end up somewhat small compared to the opening - I just printed this file twice, so it ended up short of the opening below. It still fits all the bits, but it isn't "perfect". Works for me, though. :)

http://www.thingiverse.com/thing:643316

Half nib tray for Agricola

Does this fit into the Agricola box as an organizer?

Yes, this is designed to fit into the original box.

Top