by billprozac, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple case for the Arietta G25 made by Acme Systems (http://www.acmesystems.it/arietta).
The holes are set for a standard M3.
Exposed hole for reset and one for the LED.
I use a short piece of clear filament to act as a light pipe, which works remarkably well. I also used a color changing filament for the inlay graphic, which is awesome!
FlashForge Creator Pro
Should print just fine as is. You may need to add helper discs if you have curling problems.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Arietta G25 by billprozac is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving billprozac a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure billprozac would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).